Filed under Break Service
one shout
My driver side caliper keeps sticking. I have changed it 2 times, the driver side roader i have change 2 times also.break pads 2 times. I don’t know what could be happening? I don’t think i would get 2 bad calipers, I have been buying them at Auto Zone, It has a lifetime warranties, the roader warrantie is over, break pads are lifetime also. Where do i start to look? what could it be break line but which one, and where is it? hope someone can HELP
.jpg "Ferrari (45)")
.jpg "Ferrari (15)")
.jpg "Detroit - Belle Isle, già sede GP di F1")
.jpg "Ferrari (6)")
Similar problem bro. I found that a clip on my rubber brake line was rusted. The rust on the inside of the clip was flaking off in layers and slowly crimping my brake line. The pedal makes enough force to get the fluid past, but the fluid wont return on its own! Pry open the clamp some and see if that fixes it. Yuo should be able to turn the rotor with some effort by hand with the trans in neutral. If not, crack the brake bleeder on the caliper, if it retracts, then I think you got your answer. Good luck